Federal Bureau of Investigation (FBI) - Printed Flag
Federal Bureau of Investigation (FBI) - Printed Flag Close Up

Federal Bureau of Investigation (FBI) – Printed Flag

SKU: Federal Bureau of Investigation (FBI) - Printed Flag

Choose your options Call-in item. Review what you need, then call or request a quote.
Mounting
Sides
Size
Quantity
Ask about pricing on sets for several offices
Your selection: Review your options above
Call 703-751-2411 or use the Request a Quote button below. Your selection goes with it.

Want appliqué and embroidery? See the Sewn version.

Federal Bureau of Investigation (FBI) - Printed Flag

  • Official Federal Bureau of Investigation design on nylon, made in the USA
  • Dye-printed on 200 denier nylon, lock stitched
  • Single-sided or double-sided (double-reverse, double-paneled or single field double seal); pole hem, fringed pole hem or grommets
  • 3x4 FT, 3x5 FT, 4x6 FT, 5x8 FT, 52x66 IN

Product Description

The Federal Bureau of Investigation (FBI) Printed Flag is dye-printed on 200 denier nylon, so every line of the Federal Bureau of Investigation’s official emblem reproduces exactly. Most printed flags are finished with a canvas header and brass grommets for an outdoor flagpole; a pole hem is available for indoor and parade display.

This is a call-in item, so you choose the details with us. Order the FBI printed flag single-sided or double-sided, with a pole hem, a fringed pole hem or grommets, in 3x4 FT, 3x5 FT, 4x6 FT, 5x8 FT or 52x66 IN.

Choose Your Options

Every Federal Bureau of Investigation (FBI) Printed Flag is made to order, so tell us how you want it built. These are the choices.

Pole hem illustration for the Federal Bureau of Investigation (FBI) Printed Flag: a sewn sleeve along the hoist edge slides over the pole
Pole hem: a sewn sleeve that slides over the pole
Illustration of an indoor flag with a pole hem and gold fringe on three edges
Pole hem with fringe: gold rayon trim on three edges
Close-up illustration of two brass grommets set into a canvas flag header
Grommets: brass rings in a canvas header, for an outdoor pole
Single-sided flag: the design is on the front only and the back is blankNCFFRONTBLANKBACK
Single-sided: design on the front, blank back
Double-sided, double-reverse: one layer of fabric, the design shows through on the back in reverseNCFFRONTNCFREADS IN REVERSEBACK
Double-sided (double-reverse): design shows through in reverse
Double-sided, double-paneled: two panels sewn back to back so the design reads correctly on both sidesNCFFRONTNCFSECOND PANEL, SEWN BACK TO BACKBACK
Double-sided (double-paneled): reads correctly on both sides
Double-sided, single field double seal: one field with the seal on the front and a second seal tacked to the backNCFFRONTNCFSECOND SEAL TACKED ONBACK
Double-sided (single field, double seal): second seal on the back

  • Mounting:
    • Pole hem: a sewn sleeve along the hoist edge that slides over an indoor or parade pole.
    • Pole hem with fringe: gold rayon fringe on three edges, the traditional ceremonial finish.
    • Grommets: brass rings set into a canvas header, the standard finish for an outdoor flagpole.
  • Single-sided or double-sided: A single-sided flag carries the design on the front only; the back is blank. A double-sided flag shows the design on both sides and is built one of three ways:
    • Double-reverse: one layer of fabric, printed on one side so the dye soaks through and the design shows on the back in reverse. The lightest build.
    • Double-paneled: two panels sewn back to back, so the design reads correctly on both sides. The heaviest build, and it needs the most wind to fly.
    • Single field, double seal: one field with the emblem on the front and a second emblem tacked to the back, so the seal reads correctly from either side without the weight of two panels.
  • Printed construction: Acid dye bonds into the nylon fiber, so the color goes deep and stays bright outdoors. Every printed flag is lock stitched, the stronger interlocking stitch, on the seams and header. For appliqué and embroidery instead of print, see the sewn version of this flag.
  • Size: 3x4 FT, 3x5 FT, 4x6 FT, 5x8 FT, 52x66 IN. For another size, give us the finished width and height you need.

The Federal Bureau of Investigation is the principal investigative arm of the Department of Justice. It investigates federal crimes and counters terrorism and espionage. It also supports state and local law enforcement through its laboratory, fingerprint records and training programs.

On July 26, 1908, Attorney General Charles J. Bonaparte ordered a force of 34 special agents to report to Chief Examiner Stanley W. Finch. The force was named the Bureau of Investigation in March 1909 and became the Federal Bureau of Investigation on July 1, 1935. J. Edgar Hoover led the bureau from 1924 until his death in 1972, adding a fingerprint division and a crime laboratory.

Today the FBI works from headquarters in Washington, 55 field offices and more than 60 legal attaché offices abroad. Its current seal dates to 1940, when Special Agent Leo Gauthier presented a design based on an earlier bureau flag he had created.

Federal Bureau of Investigation (FBI) Flag: Symbolism at a Glance

  • Blue field and scales: Justice.
  • Circle of 13 stars: Unity of purpose, as shown by the original 13 states.
  • Laurel branches: Academic honors, distinction and fame. Its 46 leaves match the 46 states in the Union when the FBI was founded in 1908.
  • Red and white stripes: Red for courage, valor and strength; white for cleanliness, light, truth and peace. As in the U.S. flag, the red stripes outnumber the white by one.
  • Peaked, beveled edge: The severe challenges confronting the FBI and the ruggedness of the organization.
  • Fidelity, Bravery, Integrity: The motto traces to a 1935 comment by Inspector W. H. Drane Lester and describes the motivating force behind the men and women of the FBI.

  • Product: Federal Bureau of Investigation (FBI) Printed Flag
  • Material: Nylon
  • Construction: Acid dye printed on 200 denier nylon; lock stitched
  • Mounting: Pole hem, pole hem with gold rayon fringe or canvas header with brass grommets
  • Sides: Single-sided or double-sided (double-reverse, double-paneled or single field double seal)
  • Sizes: 3x4 FT, 3x5 FT, 4x6 FT, 5x8 FT, 52x66 IN
  • Display: Outdoor flagpole with grommets; indoor and parade with a pole hem
  • Origin: Made in the USA
  • Ordering: Call 703-751-2411 or request a quote; this item is not sold online
  • Hardware: Indoor poles, floor stands, finials, outdoor poles and halyard are in Hardware and Accessories

  • FBI headquarters, field offices and resident agencies
  • Graduation and promotion ceremonies at the FBI Academy
  • Retirement and award presentations for special agents
  • Joint task force offices and fusion centers
  • Law enforcement memorials and recognition events
  • Fly it beneath the American flag on an outdoor flagpole, or on its own pole beside it

Which options can I choose on the Federal Bureau of Investigation (FBI) Printed Flag?

Single-sided or double-sided; a pole hem, a fringed pole hem or grommets; and 3x4 FT, 3x5 FT, 4x6 FT, 5x8 FT or 52x66 IN. Review them above, then call or request a quote.

How is a double-sided flag made?

Three ways. Double-reverse is one layer of fabric, so the design shows through on the back in reverse; it is the lightest build and flies in the least wind. Double-paneled is two panels sewn back to back, so the design reads correctly on both sides; it is the heaviest. Single field, double seal is one field with a second emblem tacked to the back, so the seal reads correctly from either side at close to single-layer weight.

For a flag seen from both sides indoors, double-paneled or single field double seal reads best. For an outdoor pole, double-reverse flies most easily. Tell us where the flag will hang and we will recommend one.

Should I order the Federal Bureau of Investigation flag sewn or printed?

Sewn appliqué and embroidery gives the emblem relief and texture, and it is the traditional choice for a ceremonial flag indoors. Printed reproduces fine seal detail exactly and is the usual choice for an outdoor flagpole. Both are made in the USA. If you are unsure, tell us where the flag will be displayed and we will recommend one.

Can the FBI printed flag be displayed indoors?

Yes. Order it with a pole hem, plain or with fringe, for an indoor or parade pole. For a formal ceremonial flag with appliqué and embroidery, see the FBI sewn flag.

How long does a printed flag last outdoors?

It depends on wind, sun and how often it flies. Acid dye bonds into the nylon fiber, so the color holds up well, and every printed flag is lock stitched for the wind. Tell us where the flag will fly and we will recommend a size and a replacement schedule.

How is the Federal Bureau of Investigation flag flown with the American flag?

The American flag takes the position of honor. On separate poles of the same height it flies on its own right, which is the viewer’s left. When two flags share one halyard, the American flag is at the peak and the Federal Bureau of Investigation flag flies below it.

How do I order the Federal Bureau of Investigation (FBI) Printed Flag?

It is a call-in item. Review your options above, then call 703-751-2411 or send them through our contact page with the quantity you need. We confirm the details before anything goes into production. Agencies that order the FBI flag for several locations can ask about a business account, and we keep the FBI flag design on file so reorders match the first set. Browse the full government agency flag collection for other departments, or read about our appliqué and embroidery and custom printing.

You might also like