U.S. Fish and Wildlife Service (FWS) - Sewn Flag
U.S. Fish and Wildlife Service (FWS) - Sewn Flag Close Up

U.S. Fish and Wildlife Service (FWS) – Sewn Flag

SKU: U.S. Fish and Wildlife Service (FWS) - Sewn Flag

Choose your options Call-in item. Review what you need, then call or request a quote.
Mounting
Sides
Size
Quantity
Ask about pricing on sets for several offices
Your selection: Review your options above
Call 703-751-2411 or use the Request a Quote button below. Your selection goes with it.

U.S. Fish and Wildlife Service (FWS) - Sewn Flag

  • Official Fish and Wildlife Service design on nylon, made in the USA
  • Appliquéd by hand, with satin stitch lettering and fill stitch detail
  • Single-sided or double-sided (double-reverse, double-paneled or single field double seal); pole hem, fringed pole hem or grommets
  • 3x4 FT, 3x5 FT, 4x6 FT, 52x66 IN

Product Description

The U.S. Fish and Wildlife Service (FWS) Sewn Flag is appliquéd and embroidered by hand in our Alexandria, Virginia shop. Each color of the Fish and Wildlife Service’s official emblem is cut from fabric and satin stitched to the nylon field. Lettering is embroidered with a satin stitch and fine detail with a fill stitch. Most sewn flags are finished with a pole hem for indoor and ceremonial display; order it with grommets if it will fly on an outdoor pole.

This is a call-in item, so you choose the details with us. Order the FWS sewn flag single-sided or double-sided, with a pole hem, a fringed pole hem or grommets, in 3x4 FT, 3x5 FT, 4x6 FT or 52x66 IN.

Choose Your Options

Every U.S. Fish and Wildlife Service (FWS) Sewn Flag is made to order, so tell us how you want it built. These are the choices.

Pole hem illustration for the U.S. Fish and Wildlife Service (FWS) Sewn Flag: a sewn sleeve along the hoist edge slides over the pole
Pole hem: a sewn sleeve that slides over the pole
Illustration of an indoor flag with a pole hem and gold fringe on three edges
Pole hem with fringe: gold rayon trim on three edges
Close-up illustration of two brass grommets set into a canvas flag header
Grommets: brass rings in a canvas header, for an outdoor pole
Single-sided flag: the design is on the front only and the back is blankNCFFRONTBLANKBACK
Single-sided: design on the front, blank back
Double-sided, double-reverse: one layer of fabric, the design shows through on the back in reverseNCFFRONTNCFREADS IN REVERSEBACK
Double-sided (double-reverse): design shows through in reverse
Double-sided, double-paneled: two panels sewn back to back so the design reads correctly on both sidesNCFFRONTNCFSECOND PANEL, SEWN BACK TO BACKBACK
Double-sided (double-paneled): reads correctly on both sides
Double-sided, single field double seal: one field with the seal on the front and a second seal tacked to the backNCFFRONTNCFSECOND SEAL TACKED ONBACK
Double-sided (single field, double seal): second seal on the back

  • Mounting:
    • Pole hem: a sewn sleeve along the hoist edge that slides over an indoor or parade pole.
    • Pole hem with fringe: gold rayon fringe on three edges, the traditional ceremonial finish.
    • Grommets: brass rings set into a canvas header, the standard finish for an outdoor flagpole.
  • Single-sided or double-sided: A single-sided flag carries the design on the front only; the back is blank. A double-sided flag shows the design on both sides and is built one of three ways:
    • Double-reverse: one layer of fabric, so the appliqué shows through on the back in reverse. The lightest build.
    • Double-paneled: two panels sewn back to back, so the design reads correctly on both sides. The heaviest build, and it needs the most wind to fly.
    • Single field, double seal: one field with the emblem on the front and a second emblem tacked to the back, so the seal reads correctly from either side without the weight of two panels.
  • Sewn construction: Each color of the emblem is cut from fabric and appliquéd to the field with a satin stitch. Lettering is embroidered with a satin stitch and fine detail with a fill stitch. The result stands in relief and reads across a room.
  • Size: 3x4 FT, 3x5 FT, 4x6 FT, 52x66 IN. For another size, give us the finished width and height you need.

The U.S. Fish and Wildlife Service is a bureau of the Department of the Interior. It manages the National Wildlife Refuge System, runs the National Fish Hatchery System, enforces federal wildlife laws and administers the Endangered Species Act, with staff in every state.

The service was created on June 30, 1940, when President Franklin D. Roosevelt merged the Bureau of Fisheries, which traced back to an 1871 fish commission, with the Bureau of Biological Survey. It inherited a refuge system that began on March 14, 1903, when President Theodore Roosevelt set aside Pelican Island as the first federal bird reservation.

The Endangered Species Act of 1973 gave the service its best-known modern responsibility. The Blue Goose, designed by conservationist J.N. "Ding" Darling, became the official symbol of the National Wildlife Refuge System on June 24, 1999.

U.S. Fish and Wildlife Service (FWS) Flag: Symbolism at a Glance

  • Leaping fish: Fisheries work. The 1962 shield used it to symbolize the Service's sport fisheries activities.
  • Flying bird: Wildlife work. The 1962 shield used a flying goose to symbolize it.
  • Water and mountains: The aquatic, estuarine and upland habitats in the Service's care, "from lake to mountaintop," as the Service explained its 1974 emblem.

  • Product: U.S. Fish and Wildlife Service (FWS) Sewn Flag
  • Material: Nylon
  • Construction: Appliqué and satin stitch lettering with fill stitch detail on nylon
  • Mounting: Pole hem, pole hem with gold rayon fringe or canvas header with brass grommets
  • Sides: Single-sided or double-sided (double-reverse, double-paneled or single field double seal)
  • Sizes: 3x4 FT, 3x5 FT, 4x6 FT, 52x66 IN
  • Display: Indoor and ceremonial with a pole hem; outdoor with grommets
  • Origin: Made in the USA
  • Ordering: Call 703-751-2411 or request a quote; this item is not sold online
  • Hardware: Indoor poles, floor stands, finials, outdoor poles and halyard are in Hardware and Accessories

  • National wildlife refuge headquarters and visitor centers
  • National fish hatcheries
  • Ecological services and law enforcement field offices
  • Public events, dedications and staff ceremonies
  • Retirement, promotion and award presentations
  • Post it beside the American flag at a podium, or carry it on a parade pole

Which options can I choose on the U.S. Fish and Wildlife Service (FWS) Sewn Flag?

Single-sided or double-sided; a pole hem, a fringed pole hem or grommets; and 3x4 FT, 3x5 FT, 4x6 FT or 52x66 IN. Review them above, then call or request a quote.

How is a double-sided flag made?

Three ways. Double-reverse is one layer of fabric, so the design shows through on the back in reverse; it is the lightest build and flies in the least wind. Double-paneled is two panels sewn back to back, so the design reads correctly on both sides; it is the heaviest. Single field, double seal is one field with a second emblem tacked to the back, so the seal reads correctly from either side at close to single-layer weight.

For a flag seen from both sides indoors, double-paneled or single field double seal reads best. For an outdoor pole, double-reverse flies most easily. Tell us where the flag will hang and we will recommend one.

Should I order the Fish and Wildlife Service flag sewn or printed?

Sewn appliqué and embroidery gives the emblem relief and texture, and it is the traditional choice for a ceremonial flag indoors. Printed reproduces fine seal detail exactly and is the usual choice for an outdoor flagpole. Both are made in the USA. If you are unsure, tell us where the flag will be displayed and we will recommend one.

How is the FWS sewn flag stitched?

Each color of the emblem is cut from fabric and appliquéd to the nylon field with a satin stitch, a dense zigzag that seals the edge of every piece. Lettering is embroidered with a satin stitch and fine detail with a fill stitch. Both are done by hand in our Alexandria, Virginia shop.

Can the FWS sewn flag be flown outdoors?

Yes, finished with grommets. A pole hem and fringe is for indoor and parade use, because a ceremonial finish wears quickly in weather. For a flag that flies every day, the FWS printed flag is the usual choice.

How is the Fish and Wildlife Service flag flown with the American flag?

The American flag takes the position of honor. On separate poles of the same height it flies on its own right, which is the viewer’s left. When two flags share one halyard, the American flag is at the peak and the Fish and Wildlife Service flag flies below it.

How do I order the U.S. Fish and Wildlife Service (FWS) Sewn Flag?

It is a call-in item. Review your options above, then call 703-751-2411 or send them through our contact page with the quantity you need. We confirm the details before anything goes into production. Agencies that order the FWS flag for several locations can ask about a business account, and we keep the FWS flag design on file so reorders match the first set. Browse the full government agency flag collection for other departments, or read about our appliqué and embroidery and custom printing.

You might also like