U.S. Department of Transportation (DOT) Sewn Flag

U.S. Department of Transportation (DOT) – Sewn Flag

SKU: U.S. Department of Transportation (DOT) Flag - Sewn

Choose your options Call-in item. Review what you need, then call or request a quote.
Sides
Construction (sewn flags)
Size
Your selection: Review your options above
Call 703-751-2411 or use the Request a Quote button below. Your selection goes with it.

U.S. Department of Transportation (DOT) - Sewn Flag

  • Official Department of Transportation (DOT) - Sewn design on nylon, made in the USA
  • Printed or sewn; single-sided, double-sided or mirror-sided
  • Canvas header and brass grommets, plain
  • 3x4 FT, 3x5 FT, 4x6 FT, 52x66 IN

Product Description

The U.S. Department of Transportation (DOT) - Sewn Flag is the outdoor version of the Department of Transportation (DOT) - Sewn flag. It carries the Department of Transportation (DOT) - Sewn’s official design on nylon, it is made in the USA, and it is finished with a canvas header and brass grommets along the hoist edge, ready to clip to the halyard of an outdoor flagpole.

This is a call-in item, so you choose the details with us. Order the Department of Transportation (DOT) - Sewn grommets flag printed or sewn, single-sided, double-sided or mirror-sided, in 3x4 FT, 3x5 FT, 4x6 FT, 52x66 IN. Grommet flags are made plain, without fringe, and every sewn grommet flag is lock stitched for the wind. Review your options above, then call 703-751-2411 or request a quote and we will confirm the details before production.

The Department of Transportation sets policy for the nation's highways, aviation, railroads, transit, pipelines and maritime commerce. Its operating administrations include the Federal Aviation Administration, the Federal Highway Administration, the Federal Railroad Administration, the Federal Transit Administration, the National Highway Traffic Safety Administration and the Maritime Administration.

Choose Your Options

Every U.S. Department of Transportation (DOT) - Sewn Flag is made to order, so tell us how you want it built. These are the choices.

Header illustration for the U.S. Department of Transportation (DOT) - Sewn Flag: the canvas strip along the hoist edge that holds the grommets
Header: the canvas strip along the hoist edge
Close-up illustration of two brass grommets set into a flag header
Grommets: brass rings set into the header
Single-sided flag illustration, front above back: the design is on the front only and the back is blank
Single-sided: design on the front, blank back
Double-sided flag illustration, front above back: two flags sewn back to back so the design reads correctly on both sides
Double-sided: reads correctly on both sides
Mirror-sided flag illustration, front above back: two layers sewn together, with the back a mirror image of the front
Mirror-sided: the back is a mirror image of the front
  • Printed or sewn: Printed flags are dye-printed on 200 denier nylon, so fine seal detail reproduces exactly. Sewn flags are appliquéd and embroidered by hand in our Alexandria, Virginia shop: each color is a separate piece of fabric stitched to the field, with lettering and fine detail embroidered.
  • Single-sided, double-sided or mirror-sided: A single-sided flag carries the design on the front only; the back is blank. A double-sided flag is two flags sewn back to back, so the design reads correctly on both sides. A mirror-sided flag is also two layers, but the back is a mirror image of the front.
  • Plain finish: Grommet flags are made plain, with hemmed edges and no fringe. Fringe is an indoor finish, and it does not belong on a flag that flies in weather.
  • Lock stitch construction (sewn flags): Every sewn grommet flag is lock stitched, the stronger interlocking stitch, because an outdoor flag takes more wind than an indoor one. There is no regular grade for grommet flags.
  • Size: 3x4 FT, 3x5 FT, 4x6 FT, 52x66 IN are standard. For a custom size, give us the finished width and height you need.

Product Features

  • Official Department of Transportation (DOT) - Sewn design: the U.S. Department of Transportation (DOT) - Sewn Flag carries the Department of Transportation (DOT) - Sewn’s official emblem, reproduced to the agency’s design in the finish and size you order.
  • Nylon field: lightweight nylon that flies in a light breeze, sheds water and dries quickly.
  • Header and grommets: a canvas header along the hoist edge with brass grommets, the standard finish for an outdoor flagpole.
  • Built your way: printed or sewn, single-sided, double-sided or mirror-sided, in standard or custom sizes.
  • Made in the USA: every Department of Transportation (DOT) - Sewn flag we sell is made in the USA.
  • Matched sets: order one flag or a set for every office, and the finish and size will be the same on each.

Historical Background

President Lyndon B. Johnson signed the Department of Transportation Act on October 15, 1966, after proposing a Cabinet-level department in his State of the Union address that January. The department began operating on April 1, 1967 with Alan S. Boyd as its first Secretary. It brought together 31 federal transportation elements, including the Federal Aviation Administration, the Federal Highway Administration, the new Federal Railroad Administration and the Coast Guard, which moved from the Treasury, along with the St. Lawrence Seaway Development Corporation.

The department's emblem is a triskelion, a three-armed whirl, adopted in 1967 and redesigned in 1980. The Coast Guard left for the Department of Homeland Security in 2003, while the modal administrations for aviation, highways, rail, transit, pipelines, motor carriers and maritime commerce remain under the department today.

About the Department of Transportation (DOT) Flag

The Department of Transportation (DOT) Flag carries the agency's official emblem as the centerpiece of the design. The emblem is a triskelion, a three-armed whirl, first adopted in 1967 and redesigned in 1980. We reproduce it to the agency's specification, in the finish and size you order.

  • Product: U.S. Department of Transportation (DOT) - Sewn Flag
  • Material: Nylon
  • Print method: Printed (acid dye on 200 denier nylon) or sewn (appliqué and embroidery)
  • Sides: Single-sided, double-sided or mirror-sided
  • Finish: Canvas header with brass grommets
  • Decoration: Plain (no fringe on grommet flags)
  • Construction (sewn flags): Lock stitch
  • Sizes: 3x4 FT, 3x5 FT, 4x6 FT, 52x66 IN or custom
  • Display: Outdoor flagpole
  • Origin: Made in the USA
  • Ordering: Call 703-751-2411 or request a quote; this item is not sold online
  • Hardware: Flagpoles, halyard and snap hooks are in Hardware and Accessories

  • Transportation headquarters and modal administration offices
  • FAA facilities and regional offices
  • Federal Highway and Transit division offices
  • Ribbon cuttings, safety events and employee ceremonies
  • Retirement, promotion and award presentations
  • Fly it beneath the American flag on an outdoor flagpole, or on its own pole beside it

Which options can I choose on the U.S. Department of Transportation (DOT) - Sewn Flag?

Printed or sewn; single-sided, double-sided or mirror-sided; and 3x4 FT, 3x5 FT, 4x6 FT, 52x66 IN. Grommet flags are always plain and, when sewn, always lock stitched. Review your options above, then call or request a quote.

What is the difference between single-sided, double-sided and mirror-sided?

A single-sided flag carries the design on the front only, and the back is blank. A double-sided flag is two flags sewn back to back, so the design reads correctly from either side. A mirror-sided flag is two layers with the back a mirror image of the front. Double-sided and mirror-sided flags weigh more and need more wind to fly.

Should I order the Department of Transportation (DOT) - Sewn flag printed or sewn?

Printed reproduces fine seal detail exactly. Sewn appliqué and embroidery gives the emblem relief and texture, and it is the traditional choice for a ceremonial flag. Both are made in the USA. If you are unsure, tell us where the flag will be displayed and we will recommend one.

Why is the grommets flag lock stitched?

An outdoor flag works harder than an indoor one. Wind loads the seams and the appliqué edges every day it flies, so every sewn grommet flag is lock stitched, the stronger interlocking stitch, with no regular grade offered.

Can the grommets flag be displayed indoors?

Yes. Many offices fly the same flag they use outside on an indoor pole with a clip set. For a formal indoor display with fringe, order the Department of Transportation (DOT) - Sewn pole hem flag instead.

How is the Department of Transportation (DOT) - Sewn flag flown with the American flag?

The American flag takes the position of honor. On separate poles of the same height it flies on its own right, which is the viewer’s left. When two flags share one halyard, the American flag is at the peak and the Department of Transportation (DOT) - Sewn flag flies below it.

How do I order the U.S. Department of Transportation (DOT) - Sewn Flag?

It is a call-in item. Review your options above, then call 703-751-2411 or send them through our contact page with the quantity you need. We confirm the details before anything goes into production. Agencies that order the Department of Transportation (DOT) - Sewn flag for several locations can ask about a business account, and we keep the Department of Transportation (DOT) - Sewn flag design on file so reorders match the first set. Browse the full government agency flag collection for other departments, or read about our appliqué and embroidery work.

Customer Reviews (0)

You might also like