Government Agency Anniversary – Sewn Flag

SKU: Government Agency Anniversary - Sewn Flag

Choose your options Call-in item. Review what you need, then call or request a quote.
Mounting
Sides
Size
Quantity
Ask about pricing on sets for several offices
Your selection: Review your options above
Call 703-751-2411 or use the Request a Quote button below. Your selection goes with it.

Government Agency Anniversary - Sewn Flag

  • Your agency’s anniversary design on nylon, made in the USA
  • Appliquéd by hand, with satin stitch lettering and fill stitch detail
  • Single-sided or double-sided (double-reverse, double-paneled or single field double seal); pole hem, fringed pole hem or grommets
  • 3x4 FT, 3x5 FT, 4x6 FT, 52x66 IN
  • Made from your agency’s own anniversary mark; one listing for any agency

Product Description

The Government Agency Anniversary Sewn Flag is appliquéd and embroidered by hand in our Alexandria, Virginia shop. Each color of your agency’s anniversary mark is cut from fabric and satin stitched to the nylon field. Lettering is embroidered with a satin stitch and fine detail with a fill stitch. Most sewn flags are finished with a pole hem for indoor and ceremonial display; order it with grommets if it will fly on an outdoor pole.

This listing covers anniversary flags for any agency. Send us your agency’s approved anniversary mark and we build the flag from it, appliquéd and embroidered. The flag pictured is one example. Yours carries your own mark, colors and years.

This is a call-in item, so you choose the details with us. Order the agency anniversary sewn flag single-sided or double-sided, with a pole hem, a fringed pole hem or grommets, in 3x4 FT, 3x5 FT, 4x6 FT or 52x66 IN.

Choose Your Options

Every Government Agency Anniversary Sewn Flag is made to order, so tell us how you want it built. These are the choices.

Pole hem illustration for the Government Agency Anniversary Sewn Flag: a sewn sleeve along the hoist edge slides over the pole
Pole hem: a sewn sleeve that slides over the pole
Illustration of an indoor flag with a pole hem and gold fringe on three edges
Pole hem with fringe: gold rayon trim on three edges
Close-up illustration of two brass grommets set into a canvas flag header
Grommets: brass rings in a canvas header, for an outdoor pole
Single-sided flag: the design is on the front only and the back is blankNCFFRONTBLANKBACK
Single-sided: design on the front, blank back
Double-sided, double-reverse: one layer of fabric, the design shows through on the back in reverseNCFFRONTNCFREADS IN REVERSEBACK
Double-sided (double-reverse): design shows through in reverse
Double-sided, double-paneled: two panels sewn back to back so the design reads correctly on both sidesNCFFRONTNCFSECOND PANEL, SEWN BACK TO BACKBACK
Double-sided (double-paneled): reads correctly on both sides
Double-sided, single field double seal: one field with the seal on the front and a second seal tacked to the backNCFFRONTNCFSECOND SEAL TACKED ONBACK
Double-sided (single field, double seal): second seal on the back

  • Mounting:
    • Pole hem: a sewn sleeve along the hoist edge that slides over an indoor or parade pole.
    • Pole hem with fringe: gold rayon fringe on three edges, the traditional ceremonial finish.
    • Grommets: brass rings set into a canvas header, the standard finish for an outdoor flagpole.
  • Single-sided or double-sided: A single-sided flag carries the design on the front only; the back is blank. A double-sided flag shows the design on both sides and is built one of three ways:
    • Double-reverse: one layer of fabric, so the appliqué shows through on the back in reverse. The lightest build.
    • Double-paneled: two panels sewn back to back, so the design reads correctly on both sides. The heaviest build, and it needs the most wind to fly.
    • Single field, double seal: one field with the emblem on the front and a second emblem tacked to the back, so the seal reads correctly from either side without the weight of two panels.
  • Sewn construction: Each color of the emblem is cut from fabric and appliquéd to the field with a satin stitch. Lettering is embroidered with a satin stitch and fine detail with a fill stitch. The result stands in relief and reads across a room.
  • Artwork: your agency’s approved anniversary mark. Send the file when you call or request a quote.
  • Size: 3x4 FT, 3x5 FT, 4x6 FT, 52x66 IN. For another size, give us the finished width and height you need.
  • Product: Government Agency Anniversary Sewn Flag
  • Material: Nylon
  • Construction: Appliqué and satin stitch lettering with fill stitch detail on nylon
  • Mounting: Pole hem, pole hem with gold rayon fringe or canvas header with brass grommets
  • Sides: Single-sided or double-sided (double-reverse, double-paneled or single field double seal)
  • Design: Your agency’s approved anniversary mark; one listing covers any agency
  • Sizes: 3x4 FT, 3x5 FT, 4x6 FT, 52x66 IN
  • Display: Indoor and ceremonial with a pole hem; outdoor with grommets
  • Origin: Made in the USA
  • Ordering: Call 703-751-2411 or request a quote; this item is not sold online
  • Hardware: Indoor poles, floor stands, finials, outdoor poles and halyard are in Hardware and Accessories

National Capital Flag makes commemorative flags for agency anniversaries, sewn or printed from the agency's own anniversary mark. The flag shown carries the United States Patent and Trademark Office (USPTO) mark for America's 250th anniversary, 1776 to 2026.

An agency anniversary usually comes with a mark of its own, and a flag carries that mark into lobbies, auditoriums and ceremonies for the anniversary year. Send us the approved artwork and we build the flag to match it.

The flag shown was made from the USPTO's 250 mark. The USPTO marked America's 250th anniversary in 2026 under the theme "Honoring the past. Celebrating American ingenuity. Inspiring the future." It held its America 250 Flagship Celebration on July 1, 2026, at its Alexandria, Virginia, headquarters. President George Washington signed the first Patent Act on July 31, 1790.

USPTO America 250 Flag: Symbolism at a Glance

  • "250": Large red numerals, each cut from fabric and appliquéd to the white field.
  • Light bulb: A faceted light bulb in red, blue and gray stands in for the zero. Red and white stripes band its base.
  • "1776-2026": The anniversary years in blue, followed by three stars in red, gray and blue.
  • "USPTO": The agency's initials in navy blue across the bottom of the flag.
  • Agency anniversary ceremonies and open houses
  • Headquarters lobbies, auditoriums and exhibit halls during the anniversary year
  • Stage backdrops for award programs and speaker events
  • Keepsake flags for agency archives and history offices
  • Post it beside the American flag at a podium, or carry it on a parade pole
Which options can I choose on the Government Agency Anniversary Sewn Flag?

Single-sided or double-sided; a pole hem, a fringed pole hem or grommets; and 3x4 FT, 3x5 FT, 4x6 FT or 52x66 IN. Review them above, then call or request a quote.

How is a double-sided flag made?

Three ways. Double-reverse is one layer of fabric, so the design shows through on the back in reverse; it is the lightest build and flies in the least wind. Double-paneled is two panels sewn back to back, so the design reads correctly on both sides; it is the heaviest. Single field, double seal is one field with a second emblem tacked to the back, so the seal reads correctly from either side at close to single-layer weight.

For a flag seen from both sides indoors, double-paneled or single field double seal reads best. For an outdoor pole, double-reverse flies most easily. Tell us where the flag will hang and we will recommend one.

Should I order the agency anniversary flag sewn or printed?

Sewn appliqué and embroidery gives the emblem relief and texture, and it is the traditional choice for a ceremonial flag indoors. Printed reproduces fine seal detail exactly and is the usual choice for an outdoor flagpole. Both are made in the USA. If you are unsure, tell us where the flag will be displayed and we will recommend one.

How is the agency anniversary sewn flag stitched?

Each color of the emblem is cut from fabric and appliquéd to the nylon field with a satin stitch, a dense zigzag that seals the edge of every piece. Lettering is embroidered with a satin stitch and fine detail with a fill stitch. Both are done by hand in our Alexandria, Virginia shop.

Can the agency anniversary sewn flag be flown outdoors?

Yes, finished with grommets. A pole hem and fringe is for indoor and parade use, because a ceremonial finish wears quickly in weather. For a flag that flies every day, the Government Agency Anniversary printed flag is the usual choice.

How is the agency anniversary flag flown with the American flag?

The American flag takes the position of honor. On separate poles of the same height it flies on its own right, which is the viewer’s left. When two flags share one halyard, the American flag is at the peak and the agency anniversary flag flies below it.

Can you make a flag for my agency’s anniversary?

Yes. This one listing covers anniversary flags for any agency; we do not list each design separately. Send your approved anniversary mark when you call or request a quote and we sew the flag from it. The flag pictured is one we have made.

How do I order the Government Agency Anniversary Sewn Flag?

It is a call-in item. Review your options above, then call 703-751-2411 or send them through our contact page with the quantity you need. We confirm the details before anything goes into production. Agencies that order the agency anniversary flag for several locations can ask about a business account, and we keep the agency anniversary flag design on file so reorders match the first set. Browse the full government agency flag collection for other departments, or read about our appliqué and embroidery and custom printing.

You might also like