Pair of flag fasteners attaching a flag to a one inch pole

Flag Fastener Pair

SKU: Flag Fastener Pair

$4.99

Attach a flag to a pole with no halyard and no tools.

  • Fits: 1 IN diameter poles
  • Quantity: pair
  • Installation: tool-free
  • Use: parade, indoor, outdoor

Made in the USA

Product Description

A flag fastener attaches a grommeted flag to a pole that has no halyard: a parade pole, a wall-mounted house pole, a stick pole, or an indoor pole used with a grommet flag. This pair fits 1 IN diameter poles, goes on by hand with no tools, and holds the flag at the top and bottom grommet so it hangs straight and does not slide down. Made in the USA.

Fasteners are the answer when a flag needs to go on a pole quickly and come off the same way: for parades, for a house bracket, for a classroom pole, for a flag that is changed for holidays. Order one pair per flag. For poles, brackets, and the rest of our outdoor hardware, see our hardware and accessories.

  • Fits: 1 IN diameter poles
  • Quantity: one pair
  • Installation: tool-free
  • Use: parade, indoor, and outdoor poles without a halyard
  • Origin: made in the USA
  • No halyard needed: holds a grommet flag on a plain pole
  • Sold as a pair: one for the top grommet and one for the bottom

Grommet flags were made for halyards, and for most of their history they were tied to a plain pole with cord or wire. The flag fastener solved the problem for the house pole and the parade pole: it grips the pole and hooks the grommet, so the flag stays put and can be swapped in seconds. The Flag Code asks that the flag never touch the ground; a fastener at each grommet is how a flag on a bracket pole stays up where it belongs.

  • House-bracket poles that take a 3 FT x 5 FT grommet flag.
  • Parade and processional poles for units that carry grommet flags.
  • Classroom and office poles used with a grommet flag rather than a pole hem.
  • Holiday and event flags that go up and come down often.
  • Spares in the drawer with the flag.

Will these fit a 3/4 IN or 1 1/4 IN pole?

This pair is sized for 1 IN poles. Ask us about fasteners for other diameters.

Do they work with a pole hem flag?

No. A pole hem flag slides over the pole. Fasteners are for flags with grommets.

Will they damage the pole?

No. They need no screws or adhesive and come off without a mark.

How many pairs do I need?

One pair per flag: one fastener at the top grommet and one at the bottom.

Are they for outdoor use?

Yes. They are made for outdoor bracket poles as well as indoor and parade poles.

How do they attach to the flag?

One fastener holds each grommet. Fit the fastener to the pole at the height of the grommet, pass the fastener through the grommet, and the flag is held at that point. Do the same at the second grommet.

You might also like