U.S. Department of Housing and Urban Development (HUD) Sewn Flag
U.S. Department of Housing and Urban Development (HUD) Sewn Flag, view 2

U.S. Department of Housing and Urban Development (HUD) – Sewn Flag

SKU: U.S. Department of Housing and Urban Development (HUD) - Sewn Flag

Choose your options Call-in item. Review what you need, then call or request a quote.
Mounting
Sides
Size
Quantity
Ask about pricing on sets for several offices
Your selection: Review your options above
Call 703-751-2411 or use the Request a Quote button below. Your selection goes with it.

U.S. Department of Housing and Urban Development (HUD) - Sewn Flag

  • Official Department of Housing and Urban Development design on nylon, made in the USA
  • Appliquéd by hand, with satin stitch lettering and fill stitch detail
  • Single-sided or double-sided (double-reverse, double-paneled or single field double seal); pole hem, fringed pole hem or grommets
  • 3x4 FT, 3x5 FT, 4x6 FT, 52x66 IN

Product Description

The U.S. Department of Housing and Urban Development (HUD) Sewn Flag is appliquéd and embroidered by hand in our Alexandria, Virginia shop. Each color of the Department of Housing and Urban Development’s official emblem is cut from fabric and satin stitched to the nylon field. Lettering is embroidered with a satin stitch and fine detail with a fill stitch. Most sewn flags are finished with a pole hem for indoor and ceremonial display; order it with grommets if it will fly on an outdoor pole.

This is a call-in item, so you choose the details with us. Order the HUD sewn flag single-sided or double-sided, with a pole hem, a fringed pole hem or grommets, in 3x4 FT, 3x5 FT, 4x6 FT or 52x66 IN.

Choose Your Options

Every U.S. Department of Housing and Urban Development (HUD) Sewn Flag is made to order, so tell us how you want it built. These are the choices.

Pole hem illustration for the U.S. Department of Housing and Urban Development (HUD) Sewn Flag: a sewn sleeve along the hoist edge slides over the pole
Pole hem: a sewn sleeve that slides over the pole
Illustration of an indoor flag with a pole hem and gold fringe on three edges
Pole hem with fringe: gold rayon trim on three edges
Close-up illustration of two brass grommets set into a canvas flag header
Grommets: brass rings in a canvas header, for an outdoor pole
Single-sided flag: the design is on the front only and the back is blankNCFFRONTBLANKBACK
Single-sided: design on the front, blank back
Double-sided, double-reverse: one layer of fabric, the design shows through on the back in reverseNCFFRONTNCFREADS IN REVERSEBACK
Double-sided (double-reverse): design shows through in reverse
Double-sided, double-paneled: two panels sewn back to back so the design reads correctly on both sidesNCFFRONTNCFSECOND PANEL, SEWN BACK TO BACKBACK
Double-sided (double-paneled): reads correctly on both sides
Double-sided, single field double seal: one field with the seal on the front and a second seal tacked to the backNCFFRONTNCFSECOND SEAL TACKED ONBACK
Double-sided (single field, double seal): second seal on the back

  • Mounting:
    • Pole hem: a sewn sleeve along the hoist edge that slides over an indoor or parade pole.
    • Pole hem with fringe: gold rayon fringe on three edges, the traditional ceremonial finish.
    • Grommets: brass rings set into a canvas header, the standard finish for an outdoor flagpole.
  • Single-sided or double-sided: A single-sided flag carries the design on the front only; the back is blank. A double-sided flag shows the design on both sides and is built one of three ways:
    • Double-reverse: one layer of fabric, so the appliqué shows through on the back in reverse. The lightest build.
    • Double-paneled: two panels sewn back to back, so the design reads correctly on both sides. The heaviest build, and it needs the most wind to fly.
    • Single field, double seal: one field with the emblem on the front and a second emblem tacked to the back, so the seal reads correctly from either side without the weight of two panels.
  • Sewn construction: Each color of the emblem is cut from fabric and appliquéd to the field with a satin stitch. Lettering is embroidered with a satin stitch and fine detail with a fill stitch. The result stands in relief and reads across a room.
  • Size: 3x4 FT, 3x5 FT, 4x6 FT, 52x66 IN. For another size, give us the finished width and height you need.

  • Product: U.S. Department of Housing and Urban Development (HUD) Sewn Flag
  • Material: Nylon
  • Construction: Appliqué and satin stitch lettering with fill stitch detail on nylon
  • Mounting: Pole hem, pole hem with gold rayon fringe or canvas header with brass grommets
  • Sides: Single-sided or double-sided (double-reverse, double-paneled or single field double seal)
  • Sizes: 3x4 FT, 3x5 FT, 4x6 FT, 52x66 IN
  • Display: Indoor and ceremonial with a pole hem; outdoor with grommets
  • Origin: Made in the USA
  • Ordering: Call 703-751-2411 or request a quote; this item is not sold online
  • Hardware: Indoor poles, floor stands, finials, outdoor poles and halyard are in Hardware and Accessories

The U.S. Department of Housing and Urban Development works to create strong, sustainable communities and quality affordable housing. It runs the Federal Housing Administration, public housing and housing choice voucher programs, community development block grants and fair housing enforcement.

President Lyndon B. Johnson signed the Department of Housing and Urban Development Act on Sept. 9, 1965, creating the 11th Cabinet department from the Housing and Home Finance Agency and its units, including the Federal Housing Administration. Robert C. Weaver became the first secretary on Jan. 18, 1966, and the first African American member of a president's Cabinet.

The Fair Housing Act of 1968 outlawed most housing discrimination and made HUD responsible for enforcing it. The department's seal, effective Jan. 13, 1967, is a stylized eagle and two stars built from bars of blue and green on a white ground.

U.S. Department of Housing and Urban Development (HUD) Flag: Design at a Glance

  • Eagle: A stylized eagle made of bars, set on a white ground.
  • Blue bars: The six upper bars, forming the upper part of the wings and the torso of the eagle.
  • Green bars: The eight lower bars, forming the lower part of the wings.
  • Stars: Two stars, the one at the right of the eagle in blue and the one at its left in green.
  • Corner stars: Four stars on the white field, blue in the upper hoist and lower fly corners and green in the other two.
  • Inscription: The words U.S. Department of Housing and Urban Development, in blue, forming a circle around the design.

  • HUD headquarters and field offices
  • Public housing authorities and community development offices
  • Fair housing and homeownership events
  • Groundbreakings, dedications and employee ceremonies
  • Retirement, promotion and award presentations
  • Post it beside the American flag at a podium, or carry it on a parade pole

Which options can I choose on the U.S. Department of Housing and Urban Development (HUD) Sewn Flag?

Single-sided or double-sided; a pole hem, a fringed pole hem or grommets; and 3x4 FT, 3x5 FT, 4x6 FT or 52x66 IN. Review them above, then call or request a quote.

How is a double-sided flag made?

Three ways. Double-reverse is one layer of fabric, so the design shows through on the back in reverse; it is the lightest build and flies in the least wind. Double-paneled is two panels sewn back to back, so the design reads correctly on both sides; it is the heaviest. Single field, double seal is one field with a second emblem tacked to the back, so the seal reads correctly from either side at close to single-layer weight.

For a flag seen from both sides indoors, double-paneled or single field double seal reads best. For an outdoor pole, double-reverse flies most easily. Tell us where the flag will hang and we will recommend one.

Should I order the Department of Housing and Urban Development flag sewn or printed?

Sewn appliqué and embroidery gives the emblem relief and texture, and it is the traditional choice for a ceremonial flag indoors. Printed reproduces fine seal detail exactly and is the usual choice for an outdoor flagpole. Both are made in the USA. If you are unsure, tell us where the flag will be displayed and we will recommend one.

How is the HUD sewn flag stitched?

Each color of the emblem is cut from fabric and appliquéd to the nylon field with a satin stitch, a dense zigzag that seals the edge of every piece. Lettering is embroidered with a satin stitch and fine detail with a fill stitch. Both are done by hand in our Alexandria, Virginia shop.

Can the HUD sewn flag be flown outdoors?

Yes, finished with grommets. A pole hem and fringe is for indoor and parade use, because a ceremonial finish wears quickly in weather. For a flag that flies every day, the HUD printed flag is the usual choice.

How is the Department of Housing and Urban Development flag flown with the American flag?

The American flag takes the position of honor. On separate poles of the same height it flies on its own right, which is the viewer’s left. When two flags share one halyard, the American flag is at the peak and the Department of Housing and Urban Development flag flies below it.

How do I order the U.S. Department of Housing and Urban Development (HUD) Sewn Flag?

It is a call-in item. Review your options above, then call 703-751-2411 or send them through our contact page with the quantity you need. We confirm the details before anything goes into production. Agencies that order the HUD flag for several locations can ask about a business account, and we keep the HUD flag design on file so reorders match the first set. Browse the full government agency flag collection for other departments, or read about our appliqué and embroidery and custom printing.

You might also like