Awaiting product image

Federal Aviation Administration (FAA) – Printed Flag

SKU: Federal Aviation Administration (FAA) - Printed Flag

Choose your options Call-in item. Review what you need, then call or request a quote.
Mounting
Sides
Size
Quantity
Ask about pricing on sets for several offices
Your selection: Review your options above
Call 703-751-2411 or use the Request a Quote button below. Your selection goes with it.

Want appliqué and embroidery? See the Sewn version.

Federal Aviation Administration (FAA) - Printed Flag

  • Official Federal Aviation Administration design on nylon, made in the USA
  • Dye-printed on 200 denier nylon, lock stitched
  • Single-sided or double-sided (double-reverse, double-paneled or single field double seal); pole hem, fringed pole hem or grommets
  • 3x4 FT, 3x5 FT, 4x6 FT, 5x8 FT, 52x66 IN

Product Description

The Federal Aviation Administration (FAA) Printed Flag is dye-printed on 200 denier nylon, so every line of the Federal Aviation Administration’s official emblem reproduces exactly, and it is made in the USA. Most printed flags are finished with a canvas header and brass grommets for an outdoor flagpole; a pole hem is available for indoor and parade display.

This is a call-in item, so you choose the details with us. Order the FAA printed flag single-sided or double-sided, with a pole hem, a fringed pole hem or grommets, in 3x4 FT, 3x5 FT, 4x6 FT, 5x8 FT or 52x66 IN. Review your options above, then call 703-751-2411 or request a quote and we will confirm the details before production.

The Federal Aviation Administration is responsible for the safety of civil aviation in the United States. Its mission is to provide the safest, most efficient aerospace system in the world. The FAA regulates civil aviation, develops and operates the air traffic control and navigation system for civil and military aircraft, researches and develops the National Airspace System, and regulates U.S. commercial space transportation. It is part of the U.S. Department of Transportation and is based at 800 Independence Avenue SW in Washington, D.C.

Choose Your Options

Every Federal Aviation Administration (FAA) Printed Flag is made to order, so tell us how you want it built. These are the choices.

Pole hem illustration for the Federal Aviation Administration (FAA) Printed Flag: a sewn sleeve along the hoist edge slides over the pole
Pole hem: a sewn sleeve that slides over the pole
Illustration of an indoor flag with a pole hem and gold fringe on three edges
Pole hem with fringe: gold rayon trim on three edges
Close-up illustration of two brass grommets set into a canvas flag header
Grommets: brass rings in a canvas header, for an outdoor pole
Single-sided flag: the design is on the front only and the back is blankNCFFRONTBLANKBACK
Single-sided: design on the front, blank back
Double-sided, double-reverse: one layer of fabric, the design shows through on the back in reverseNCFFRONTNCFREADS IN REVERSEBACK
Double-sided (double-reverse): design shows through in reverse
Double-sided, double-paneled: two panels sewn back to back so the design reads correctly on both sidesNCFFRONTNCFSECOND PANEL, SEWN BACK TO BACKBACK
Double-sided (double-paneled): reads correctly on both sides
Double-sided, single field double seal: one field with the seal on the front and a second seal tacked to the backNCFFRONTNCFSECOND SEAL TACKED ONBACK
Double-sided (single field, double seal): second seal on the back

  • Mounting: A pole hem is a sewn sleeve along the hoist edge that slides over an indoor or parade pole. A pole hem with fringe adds gold rayon fringe on three edges, the traditional ceremonial finish. Grommets are brass rings set into a canvas header, the standard finish for an outdoor flagpole.
  • Single-sided or double-sided: A single-sided flag carries the design on the front only; the back is blank. A double-sided flag shows the design on both sides and is built one of three ways:
    • Double-reverse: one layer of fabric, printed on one side so the dye soaks through and the design shows on the back in reverse. The lightest build.
    • Double-paneled: two panels sewn back to back, so the design reads correctly on both sides. The heaviest build, and it needs the most wind to fly.
    • Single field, double seal: one field with the emblem on the front and a second emblem tacked to the back, so the seal reads correctly from either side without the weight of two panels.
  • Printed construction: Acid dye bonds into the nylon fiber, so the color goes deep and stays bright outdoors. Every printed flag is lock stitched, the stronger interlocking stitch, on the seams and header. For appliqué and embroidery instead of print, see the sewn version of this flag.
  • Size: 3x4 FT, 3x5 FT, 4x6 FT, 5x8 FT, 52x66 IN. For another size, give us the finished width and height you need.

Product Features

  • Official Federal Aviation Administration design: the Federal Aviation Administration (FAA) Printed Flag carries the Federal Aviation Administration’s official emblem, reproduced to the agency’s design in the mounting and size you order.
  • Printed construction: dye-printed on 200 denier nylon and lock stitched, so fine seal detail reproduces exactly and the color holds up in sun and rain.
  • Nylon field: lightweight nylon that flies in a light breeze, sheds water and dries quickly.
  • Built your way: single-sided or double-sided (double-reverse, double-paneled or single field double seal); pole hem, fringed pole hem or grommets; 3x4 FT, 3x5 FT, 4x6 FT, 5x8 FT, 52x66 IN.
  • Made in the USA: every FAA flag we sell is made in the USA.
  • Matched sets: order one flag or a set for every office, and the mounting and size will be the same on each.

Federal oversight of civil aviation began with the Air Commerce Act of 1926, which created an Aeronautics Branch in the Department of Commerce, renamed the Bureau of Air Commerce in 1934. President Franklin Roosevelt signed the Civil Aeronautics Act in 1938, creating the Civil Aeronautics Authority. In 1940 it was split into the Civil Aeronautics Administration, which returned to the Department of Commerce, and the Civil Aeronautics Board.

On August 23, 1958, President Dwight D. Eisenhower signed the Federal Aviation Act, which created an independent Federal Aviation Agency responsible for civil aviation safety. Elwood "Pete" Quesada took office as its first Administrator on November 1, 1958, and on December 31, 1958 the agency took on the full scope of its duties, replacing the Civil Aeronautics Administration. When the new Department of Transportation began full operations on April 1, 1967, the Federal Aviation Agency became one of its modal organizations and was renamed the Federal Aviation Administration.

The Federal Aviation Act of 1958 directed the new agency to adopt an official seal. The Army provided several designs, and after several changes the agency accepted one on July 21, 1959. Administrator Quesada formally adopted the seal on October 29, 1959, and it was published in the Federal Register on November 5, 1959. The wording changed when the agency was renamed in 1967, and in 2006 the FAA removed the fleur de lis from the top of the compass.

The Federal Aviation Administration (FAA) Flag carries the FAA emblem at the center of an orange field. FAA Order 1700.6D describes the FAA logo as a circular gold border around a blue background with the white words "Federal Aviation" at the top and "Administration" at the bottom, enclosing a light green globe with gold latitude and longitude markings and a gold four-pointed compass rose with a stylized gold wing on its horizontal axis. We make it in the finish and size you order.

Federal Aviation Administration (FAA) Flag: Symbolism at a Glance

  • Globe: Shows the world in a circle, which denotes the immense space covered in flight.
  • Four-pointed compass rose: Denotes the direction of flight.
  • Wing: Represents speed in flight.

  • Product: Federal Aviation Administration (FAA) Printed Flag
  • Material: Nylon
  • Construction: Acid dye printed on 200 denier nylon; lock stitched
  • Mounting: Pole hem, pole hem with gold rayon fringe, or canvas header with brass grommets
  • Sides: Single-sided or double-sided (double-reverse, double-paneled or single field double seal)
  • Sizes: 3x4 FT, 3x5 FT, 4x6 FT, 5x8 FT, 52x66 IN
  • Display: Outdoor flagpole with grommets; indoor and parade with a pole hem
  • Origin: Made in the USA
  • Ordering: Call 703-751-2411 or request a quote; this item is not sold online
  • Hardware: Indoor poles, floor stands, finials, outdoor poles and halyard are in Hardware and Accessories

  • FAA headquarters, regional offices and field facilities
  • Air traffic control towers and centers
  • Retirement, promotion and award ceremonies
  • Aviation safety conferences and events
  • Offices, lobbies and conference rooms
  • Fly it beneath the American flag on an outdoor flagpole, or on its own pole beside it

Which options can I choose on the Federal Aviation Administration (FAA) Printed Flag?

Single-sided or double-sided; a pole hem, a fringed pole hem or grommets; and 3x4 FT, 3x5 FT, 4x6 FT, 5x8 FT or 52x66 IN. Review them above, then call or request a quote.

How is a double-sided flag made?

Three ways. Double-reverse is one layer of fabric, so the design shows through on the back in reverse; it is the lightest build and flies in the least wind. Double-paneled is two panels sewn back to back, so the design reads correctly on both sides; it is the heaviest. Single field, double seal is one field with a second emblem tacked to the back, so the seal reads correctly from either side at close to single-layer weight.

For a flag seen from both sides indoors, double-paneled or single field double seal reads best. For an outdoor pole, double-reverse flies most easily. Tell us where the flag will hang and we will recommend one.

Should I order the Federal Aviation Administration flag sewn or printed?

Sewn appliqué and embroidery gives the emblem relief and texture, and it is the traditional choice for a ceremonial flag indoors. Printed reproduces fine seal detail exactly and is the usual choice for an outdoor flagpole. Both are made in the USA. If you are unsure, tell us where the flag will be displayed and we will recommend one.

Can the FAA printed flag be displayed indoors?

Yes. Order it with a pole hem, plain or with fringe, for an indoor or parade pole. For a formal ceremonial flag with appliqué and embroidery, see the FAA sewn flag.

How long does a printed flag last outdoors?

It depends on wind, sun and how often it flies. Acid dye bonds into the nylon fiber, so the color holds up well, and every printed flag is lock stitched for the wind. Tell us where the flag will fly and we will recommend a size and a replacement schedule.

How is the Federal Aviation Administration flag flown with the American flag?

The American flag takes the position of honor. On separate poles of the same height it flies on its own right, which is the viewer’s left. When two flags share one halyard, the American flag is at the peak and the Federal Aviation Administration flag flies below it.

How do I order the Federal Aviation Administration (FAA) Printed Flag?

It is a call-in item. Review your options above, then call 703-751-2411 or send them through our contact page with the quantity you need. We confirm the details before anything goes into production. Agencies that order the FAA flag for several locations can ask about a business account, and we keep the FAA flag design on file so reorders match the first set. Browse the full government agency flag collection for other departments, or read about our appliqué and embroidery and custom printing.

You might also like